This build is for development purposes only
Do not distribute outside of HTC
without HTC’s written permission.
Failure to comply may lead to legal action.
excited, so I’m gone let’s see how we can change that. I then find it on XDA geworten. But since I do not want my HBOOT replaced by some others, but wanted to change my own (safe), I’ve made the ro.cid like changing with hex editor.
If someone takes as a guide, I am not liability, you must be bewust you that you can hereby make the one doubling as a paperweight. You do it at your own risk. It should only try those who have already had experience with a hex editor and ADB tools. Also, your phone must be S-off and thus have SU rights. What would be nice if you would have SuperCID (CID 11111111 and I have been working with a Windows 8 PC and have all HTC drivers installed):
1 You need ADB tools (google will help you) Sets the folder just as possible to C: from
2 You need a decent HEX editor (I needed HxD)
3 Go to the Windows Run (Windows Key + r) 4
give cmd and confirm with Enter
5 go to the folder of adb-tools (for me I first had to “cd ..” enter “cd ..” enter “cd tools adb” until I was in the folder, but all depends on where you have the folder)
6 If you landed in the folder adb-tools since, give there “adb shell” and press enter
7 To get superuser rights, give there “su” and press enter
8 To read the hboot file from the restricted area give “dd if = / dev/block/mmcblk0p12 of = / sdcard/mmcblk0p12″ and press enter (this copies the file to SD card euere)
9 “Exit” Enter “exit” Enter (you should now be back in the folder adb tools)
10 With “adb pull / sdcard/mmcblk0p12″ you copied th e file in your adb tools folder (you notice the file size after processing must remain the same size!
11 Now you open the file with the hex mmcblk0p12 above Editor (Hxd best)
12 Searches for “
This build is for development purposes only
Do not distribute outside of HTC’s HTC
without written permission.
Failure to comply may lead to legal action.
“
13 now replaced her with 20 letters each (if you liked the first T of” This build is for .. . “left you see what number it starts (” 54 “)) and each distance with respect to the circuit 00 is still a point (in hex” 2E “, this you must also replace with 20) (see picture)
14 Saves of you changed file with the ADB tools folder as “mmcblk0p12MOD” (so you keep the original file and you can work with the MOD file)
15 If you like the image in the amended you and the Size you checked you can go now, until now you have not yet changed on the phone, but now you have to make everything as described, copied from best the text from here and paste it with the right Maustatste in the cmd a! Controls also reiterated that the MOD file really “mmcblk0p12MOD” means!
16 If you have closed the cmd window, here is the need to open it again and the ADB tools folders (as described above (point 4 . and 5)
17 To copy the “mmcblk0p12MOD” file to give your cell phone, “adb push mmcblk0p12MOD / sdcard/mmcblk0p12MOD” and hit enter
18 After copying, you must again return to the Android shell go with (see point 6 and 7) There
18 then you give “dd if = / sdcard/mmcblk0p12MOD of = / dev/block/mmcblk0p12″ and hit enter (you copied the file to the protected area and identifies the file back correctly)
19 “exit” Enter “exit” Enter (you should now again be in the folder adb tools) start
20 new mobile phone and you should the red Text not see
important to have said it once, you do it at your own risk, it could be that you Shoot the phone! vA with “dd if =” you can with superuser rights ziehmlich zerschiessen everything you have on the phone., this can not be undone if need be, I assume absolutely no liability
No comments:
Post a Comment